Peer Reviewed Journal Publications:

  1. D. Maynes and M. Butcher, 2000, "Effect of Body Aspect Ratio and Tank Size on the Hydrodynamics of a Rotating Bluff Body During the Initial Spin-up Period," Journal of Fluids Engineering, under review.

  2. H. Robey and D. Maynes, 2000, "Numerical Simulation of the Hydrodynamics and Mass Transfer in the Large Scale, Rapid Growth of KDP Crystals. Part 1: Computation of the Transient Three Dimensional Flow Field," Journal of Crystal Growth, under review.

  3. D. Maynes and A. Webb, 2000, "Velocity Profile Characterization in Sub-millimeter Diameter Tubes using Molecular Tagging Velocimetry," Experiments in Fluids under review.

  4. S. Thomson and D. Maynes, 2000, "Advances in Molecular Tagging Thermometry," accepted for presentation at the ASME 2000 Fluid Dynamics Symposium in Boston, MA, June 2000, also Journal of Fluids Engineering, under review.

  5. D. Maynes, 2000, "Molecular Tagging Velocimetry Characterization of Rapid KDP Crystal Growth," AIChE Journal, Vol. 46, No. 3, March 2000, pp. 450–461.

  6. J. Bowman, T. Moss, D. Maynes, and K. Paulson, 2000, "Efficiency of a Constant Area, Adiabatic Tip, Heat Pipe Fin," Journal of Thermophysics and Heat Transfer, Vol. 14, pp. 112-115.

  7. D. Maynes, J. Klewicki, P. McMurtry, 1999, "Spin-up in a Tank Induced by a Rotating Bluff Body," Journal of Fluid Mechanics, Vol. 388, pp. 49–68.

  8. D. Maynes and G. Gebert, 1999, "High Angle of Attack Aerodynamics of a Missile Geometry at Low Speed," Journal of Spacecraft and Rockets, Vol. 36, No. 4, pp. 772–774.

  9. D. Maynes, P. McMurtry and J. Klewicki, 1998, "Time Resolved Torque of Three Dimensional Rotating Bluff Bodies in a Cylindrical Tank," Journal of Fluids Engineering, Vol. 120, No. 1, pp. 23–29.

  10. D. Maynes, P. McMurtry, J. Klewicki and H. Robey, 1997, "Hydrodynamic Scalings in the Rapid Growth of Crystals From Solution," Journal of Crystal Growth, Vol. 178, pp. 545–558.

  11. R. D. Maynes and G. A. Gebert, 1995, "Rotating Nose Tip Effects on Slender Body Aerodynamics at High Angles of Attack," Journal of Spacecraft and Rockets, Vol. 32, No. 6, pp. 944-950.

 

 

Conference Papers:

  1. J. Judy, D. Maynes, and B. Webb, "Liquid Flow Pressure Drop in Microtubes," to be presented at the Engineering Foundation Conference Heat Transfer and Transport Phenomena in Microsystems in Banff, Canada, October 2000.

  2. S. Thomson and D. Maynes, "Advances in Molecular Tagging Thermometry," presented at the ASME 2000 Fluid Dynamics Symposium in Boston, MA, June 2000.

  3. W. J. Bowman and D. Maynes, "Analytical Comparison of Specified Tip Temperature Standard and Heat Pipe Fins," presented at the 34th AIAA Thermophysics conference in Denver, CO, June 2000.

  4. T. Moss, W. J. Bowman, D. Maynes, and K. A. Paulson, 1999, "Efficiency of a Constant Area, Adiabatic Tip, Heat-Pipe Fin," AIAA 99-3443, 33rd AIAA Thermophysics Conference, Norfolk, VA.

  5. A. Webb and D. Maynes, 1999, "Velocity Profile Measurements in Microtubes," AIAA 99-3803, 30th AIAA Fluid Dynamics Conference, Norfolk VA.

  6. S. L. Thomson and D. Maynes, 1999, "Temperature Profile Measurements Using Molecular Tagging Velocimetry," AIAA 99-3601, Fluid Dynamics Conference, Norfolk VA.

  7. T. Haws and D. Maynes, 1999, "Steady State Axial and Tangential Velocity Characteristics for Rotating Bluff Bodies," Proceedings of the 36th Heat Transfer and Fluid Mechanics Institute, Sacramento CA, pp. 211-230.

  8. M. Butcher and D. Maynes, 1999, Analysis of Torque Measurements on Rotating Bluff Bodies," Proceedings of the 36th Heat Transfer and Fluid Mechanics Institute, Sacramento CA, pp. 231-248.

  9. D. Maynes, P. McMurtry, J. Klewicki, 1997, "Scale-up of Transient Rotating Bluff Body Flows in Geometrically Dissimilar Tanks," Presented at the 1997 AIChE Annual Meeting, Los Angeles, CA, Paper 150c.

  10. D. Maynes and H. Robey, 1997, "Characteristics of the Axial and Tangential Velocities near a Rotating Bluff Body on a Platform," American Physical Society Bull., Vol. 42, Fluid Dynamics.

  11. H. Robey, D. Maynes, 1997, "Numerical Simulation of the Fluid Dynamics and Mass Transfer in the Rapid Growth of Large KDP Crystals," American Physical Society Bull., Vol. 42, Fluid Dynamics.

  12. R. D. Maynes, P. McMurtry and J. Klewicki, 1996, "Evolution of the Turbulent Flow Field Around a Rotating Bluff Body," American Physical Society Bull., Vol. 41, No. 9, pp.1785.

  13. R. D. Maynes, P. McMurtry and J. Klewicki, 1995, "Experimental Techniques used in the Characterization of the Hydrodynamics Associated with Accelerated KDP Crystal Growth," American Physical Society Bull., Vol. 40, No. 12, pp. 2005.

  14. G. A. Gebert and R. D. Maynes, 1996, "Analysis of the High Angle of Attack Aerodynamics on Finned Bodies with Spinning Nose Tip Strakes," AIAA 96-0191, AIAA 34th Aerospace Sciences Meeting, Reno NV.

  15. R. D. Maynes and G. A. Gebert, 1995, "An Investigation of the Effects of a Rotating Nose Tip on the Aerodynamics of a Slender Body at High Angles of Attack," AIAA 95-0314, 33rd Aerospace Sciences Meeting, Reno NV.

  16. G. A. Gebert and R. D. Maynes, 1995, "Analysis of the High Angle of Attack Aerodynamics on Bodies with Spinning Nose Strakes," AIAA 95-0315, 33rd Aerospace Sciences Meeting, Reno NV.

  17. R. D. Maynes and G. A. Gebert, 1994, "An Investigation of High Angle of Attack Aerodynamics of a Finned and Finless Body with a Fineness Ratio of 20.0," AIAA 94-0724, 32nd Aerospace Sciences Meeting, Reno NV.

  18. G. Gebert and R. Maynes, 1994, "Discrete Vortex Methods for the Determination of Finned Body Aerodynamics," AIAA 94-0151, 32nd Aerospace Sciences Meeting, Reno NV.

 

M.S. Thesis:

R. D. Maynes, "An Investigation of the Effects of a Rotating Forebody on the Aerodynamics of Slender Bodies at High Angles of Attack" 1993, Utah State University

Ph.D. Dissertation:

D. Maynes "On Rotating Bluff Body Flows," 1997, University of Utah.